On the Contribution of Higher Azimuthal Modes to the Near- and Far-Field of Jet Mixing Noise

The prediction of jet mixing noise is studied using a stochastic realization of the Tam & Auriault source model. The acoustical sources are generated by means of the Random Particle-Mesh Method (RPM), which utilizes turbulence statistics as provided by solu- tions to the Reynolds Averaged Navier-Stokes (RANS) equations. The generated stochas- tic sound sources closely realize the two-point cross-correlation function used in the jet noise model to prescribe the fine-scale sound source. The RPM code is coupled with the DLR CAA solver PIANO. The azimuthal-modal decomposed linearized Euler equations are applied as governing equations. With this approach, it is possible to evaluate jet noise spectra at any position in the near-field. Based on an azimuthal decomposition, 3-D sound radiation from the jet can be reproduced at the computational price of a few axisymmetric 2-D computations. Furthermore, it will be shown, that we are able to verify the imple- mented methodology with the results published for the genuine model. The spectra are correctly predicted in terms of sound pressure levels, Mach scaling exponent and spectral shape. A Strouhal number range of up to St = 10 can be covered using the first six az- imuthal mode components of the broadband source. To reach higher Strouhal numbers more azimuthal modes have to be adopted. The presented results reveal the importance of individual azimuthal contributions to the total spectra. To evaluate the spectra in the far-field, the generated near-field noise is extrapolated with a modal Ffowcs-Williams & Hawkings (FWH) method. For the static single stream jet (Ma = 0.9) two different kinds of extrapolation were used - a simplified extrapolation and the modal FWH method. With this computational case, it was possible to predict a jet noise spectrum in the range of St = 0.01 . . . 20. To investigate the effect of different nozzle configurations on sound gener- ation, different nozzle configurations, i.e. dual-stream nozzles with and without nozzle lip treatments are simulated. Good agreement with experimental data for the noise reduction potential of nozzle lip treatments is found

Health and Outdoor Settings: A Summary of the Coalition for Education in the Outdoors Pre-Symposium Workshop, 2018

At the Coalition for Education in the Outdoors (CEO) 14th Biennial Research Symposium, researchers and practitioners explored the intersection between outdoor education settings and practices and human health during a pre-symposium workshop. Guided by a supposition that outdoor education experiences impact one or more dimensions of health, participants first aligned around a collective foundation of 1) definitions of nature and health and 2) formative scholarship in outdoor exposure and natural elements. With this foundation, existing paradigms were questioned: Are mainstay methodologies used in outdoor education efficacious, particularly if researchers are to engage with cross-disciplinary research teams or seek new funding sources? Given the United States’ increasing urbanization, should those working in outdoor recreation reconsider the prevailing idealization of pristine landscapes (e.g., mountain vistas and whitewater rapids), and instead celebrate both “sequoias and street trees”? Moreover, questions regarding the long-term health benefits of outdoor education remain largely unanswered. These questions resulted in the identification of gaps in research and practice. “Dosage” of outdoor exposure was one common query, as were concerns of social justice. Ultimately, workshop attendees expressed support for continued work in the intersection of health and outdoor education. This research note summarizes the Health & Outdoor Settings workshop and resulting recommended steps for subsequent research efforts

Lunar Dust Contamination Effects on Lunar Base Thermal Control Systems

Many studies have been conducted to develop a thermal control system that can operate under the extreme thermal environments found on the lunar surface. While these proposed heat rejection systems use different methods to reject heat, each system contains a similar component, a thermal radiator system. These studies have always considered pristine thermal control system components and have overlooked the possible deleterious effects of lunar dust contamination. Since lunar dust has a high emissivity and absorptivity (greater than 0.9) and is opaque, dust accumulation on a surface should radically alter its optical properties and therefore alter its thermal response compared to ideal conditions. In addition, the non-specular nature of the dust particles will alter the performance of systems that employ specular surfaces to enhance heat rejection. To date, few studies have examined the effect of dust deposition on the normal control system components. These studies only focused on a single heat rejection or photovoltaic system. These studies did show that lunar dust accumulations alter the optical properties of any lunar base hardware, which in turn affects component temperatures, and heat rejection. Therefore, a new study was conducted to determine the effect of lunar dust contamination on heat rejection systems. For this study, a previously developed dust deposition model was incorporated into the Thermal Synthesizer System (TSS) model. This modeling scheme incorporates the original method of predicting dust accumulation due to vehicle landings by assuming that the thin dust layer can be treated as a semitransparent surface slightly above and in thermal contact with the pristine surface. The results of this study showed that even small amounts of dust deposits can radically alter the performance of the heat rejection systems. Furthermore. this study indicates that heat rejection systems be either located far from any landing sites or be protected from dust producing mechanisms

Aerospace applications of SINDA/FLUINT at the Johnson Space Center

SINDA/FLUINT has been found to be a versatile code for modeling aerospace systems involving single or two-phase fluid flow and all modes of heat transfer. Several applications of SINDA/FLUINT are described in this paper. SINDA/FLUINT is being used extensively to model the single phase water loops and the two-phase ammonia loops of the Space Station Freedom active thermal control system (ATCS). These models range from large integrated system models with multiple submodels to very detailed subsystem models. An integrated Space Station ATCS model has been created with ten submodels representing five water loops, three ammonia loops, a Freon loop and a thermal submodel representing the air loop. The model, which has approximately 800 FLUINT lumps and 300 thermal nodes, is used to determine the interaction between the multiple fluid loops which comprise the Space Station ATCS. Several detailed models of the flow-through radiator subsystem of the Space Station ATCS have been developed. One model, which has approximately 70 FLUINT lumps and 340 thermal nodes, provides a representation of the ATCS low temperature radiator array with two fluid loops connected only by conduction through the radiator face sheet. The detailed models are used to determine parameters such as radiator fluid return temperature, fin efficiency, flow distribution and total heat rejection for the baseline design as well as proposed alternate designs. SINDA/FLUINT has also been used as a design tool for several systems using pressurized gasses. One model examined the pressurization and depressurization of the Space Station airlock under a variety of operating conditions including convection with the side walls and internal cooling. Another model predicted the performance of a new generation of manned maneuvering units. This model included high pressure gas depressurization, internal heat transfer and supersonic thruster equations. The results of both models were used to size components, such as the heaters and gas bottles and also to point to areas where hardware testing was needed

High-order propagation of jet noise on a tetrahedral mesh using large eddy simulation sources

Jet noise is an important area of research in commercial aviation due to its high contribution to the overall noise generated by an aircraft. Conventionally, CFD combined with surface integral methods is used to study jet noise because of its low cost. However, it is not always trivial to define integration surfaces around complex geometries. This study employs a different two-step approach that can handle complex geometries. It combines a large-eddy simulation (LES) to obtain the acoustic sources from the flow field, and an acoustic perturbation equations (APE) solver to propagate the sound to the far field. The LES is performed with an industrial 2nd-order finite volume solver. The APE code is a high-order discontinuous Galerkin (DG) spectral/hp solver of the Nektar+ + framework. The APE solver is validated on a canonical test case. A study on different polynomial expansion orders and meshes is further performed to estimate the mesh size for noise propagation in the high-order spectral/hp DG context. Finally, a three-dimensional jet noise case (Re = 10, 000 and Mach = 0.9) is simulated using unstructured tetrahedral mesh for the APE solver and improved noise results for high frequencies are obtained. The results demonstrate that the present approach is capable of predicting noise in complex geometry scenarios, such as installed jets under the aircraft wings

Exploring efficacy in personal constraint negotiation: an ethnography of mountaineering tourists

Limited work has explored the relationship between efficacy and personal constraint negotiation for adventure tourists, yet efficacy is pivotal to successful activity participation as it influences people’s perceived ability to cope with constraints, and their decision to use negotiation strategies. This paper explores these themes with participants of a commercially organised mountaineering expedition. Phenomenology-based ethnography was adopted to appreciate the social and cultural mountaineering setting from an emic perspective. Ethnography is already being used to understand adventure participation, yet there is considerable scope to employ it further through researchers immersing themselves into the experience. The findings capture the interaction between the ethnographer and the group members, and provide an embodied account using their lived experiences. Findings reveal that personal mountaineering skills, personal fitness, altitude sickness and fatigue were the four key types of personal constraint. Self-efficacy, negotiation-efficacy and other factors, such as hardiness and motivation, influenced the effectiveness of negotiation strategies. Training, rest days, personal health, and positive self-talk were negotiation strategies. A conceptual model illustrates these results and demonstrates the interplay between efficacy and the personal constraint negotiation journey for led mountaineers

Towards democratic intelligence oversight: Limits, practices, struggles

Despite its common usage, The meaning of 'democratic' in democratic intelligence oversight has rarely been spelled out. In this paper, we situate questions regarding intelligence oversight within broader debates about the meanings and practices of democracy. We argue that the literature on intelligence oversight has tended to implicitly or explicitly follow liberal and technocratic ideas of democracy, which have limited the understanding of oversight both in academia and in practice. Thus, oversight is mostly understood as an expert, institutional and partially exclusive arrangement that is supposed to strike a balance between individual freedom and collective security with the goal of establishing the legitimacy of, and trust in intelligence work in a national setting. ‘Healthy’ or ‘efficient’ democratic oversight then becomes a matter of technical expertise, non-partisanship, and the ability to guard secrets. By analysing three moments of struggle around what counts as intelligence oversight across Germany, the UK, and the USA, this paper elucidates their democratic stakes. Through a practice-based approach, we argue that oversight takes much more agonistic, contentious, transnational, and public forms. However, these democratic practices reconfiguring oversight remain contested or contained by dominant views on what constitutes legitimate and effective intelligence oversight